Join the 3D print revolution with your very own desktop 3D printer.
The Makerbot Replicator 2 is an easy, and affordable tool for making professional-quality models, toys, gifts and many more objects.
100-MICRON LAYER RESOLUTION means you get smooth surfaces. Or use the fast print, lower resolution settings for drafts and models.
410 CUBIC INCH INDUSTRY-LEADING BUILD VOLUME - that means bigger prints, professional-quality, high-resolution prototypes and complex models. And print multiple things at once so you can get to work on your next design sooner.
EASY TO USE SOFTWARE Intuitive software lets you quickly start printing your objects.
OPTIMIZED FOR PLA FILAMENT, low cost consumables in a variety of colours.
Fused Deposition Modeling
24.6cm (L) x 15.2cm (W) x 15.5cm (H) / 9.7" x 6" x 6.1"
100 MICRONS / 0.0039"
1.75mm / 0.069"
Makerbot PLA Filament / Small Spool 0.9kg / 2.0lb / XL Spool 2.26kg / 5lb / XXL Spool 4.53kg / 10lb
0.4mm / 0.015"
Print File Type
Ambient Operating Temperature
15-26°C / 60-78°F
0-38°C / 32-100°F
49cm (L) X 42cm (W) x 53.1cm (H) / 19.1" x 16.5" x 20.9"
60.5cm (L) x 58.4cm (W) x 41.7cm (H) / 23" x 23.8" x 16.4"
17.8kg / 39.25lbs
Powder Coated Steel / PVC Panels
Heated, Black Anodized 356F Aluminum
1.8° Step Angle With 1/16 Micro-Stepping
XY Positioning Precision
11 Microns / 0.0004"
Z Positioning Precision
2.5 Microns / 0.0001"
Supported File Types
STL, OBJ, THING, MAKERBOT
Windows (7+) / MAC OS X (10.7+) / LINUX (UBUNTU, FEDORA)
100–240 V, ~4 AMPS, 50–60 HZ
USB, SD CARD (Both Included)
320 X 240
Stepper Motor (Threaded, 285 mm) (Rep 2 & Rep 2x)
BotStep *These come pre-installed on RevH MightyBoards (Rep 2 & Rep 2x)
Squeegee (Industry Standard) (Rep 2 & Rep 2x)
Formed Front Bezel Bracket (Rep 2 & Rep 2x)
Rep2/2X Interface Board PCBA Button Assembly
Cable Assembly A - Interface Cable (Rep 2 & Rep 2x)
Power Supply (6a) *Used w/ all Replicator 2s, regardless of ship date (Rep 2)
Replicator 2 & Replicator 2X Type K Thermocouple
Bar Mount Assembly w/ Stranded Thermocouple (Rep 2)
Cable Assembly C - Extruder Stepper Control / Heater / Fan (Rev2 / Ferrite) (Rep 2 & Rep 2x)
Jumper Cable - X Motor *Should be used w/ MP05206, (Rep 2 & Rep 2x)
Jumper Cable - X Endstop *Should be used w/ MP05205, can be used w/ MP03113 (Rep 2 & Rep 2x)
Cable Assembly "D"- XYZ Endstop Cable w/ferrite (v2)
Cable Assembly E - XYZ Motor (Rev2 / Ferrite) *Must be used w/ MP05202 (Rep 2 & Rep 2x)
Hot End Assembly w/ Stranded Thermocouple (Rep 2)
MightyBoard RevG *Should be used if Replicator 2 or 2X was shipped prior to June 18, 2013 (Rep 2 & Rep 2x)
MightyBoard RevH (4 BotSteps Attached) *Should be used if Replicator 2 was shipped on or after June 18, 2013 (Rep 2)
Mechanical Endstop (v1.2) PCBA (Rep 2 & Rep 2x)
NEMA 17 Stepper Motor w/ 5 mm Shaft (Rep 2 & Rep 2x)