Raise3D Hyper Speed Upgrade Kit (Pro3 Series and Pro2 Series)

The Hyper Speed Upgrade Kit (Pro3 Series and Pro 2 Series Only) is the first product from Raise3D’s Hyper FFF technology. With the upgrade, the printing speed of a Pro3 Series and Pro 2 Series 3D printer is boosted from an average of 50-80 mm/s to 200-350 mm/s, and acceleration is boosted from 1,000 mm/s2 to 10,000 mm/s2, with no loss of accuracy or part quality.

A printer equipped with a Hyper Speed Upgrade can deliver 600-1,000 grams of filament within 24 hours, meaning any parts under 400 grams will be finished within 12 hours.

The kit includes:

• An Upgrade Letter
• Software upgrades
• Two Hyper Speed Hot Ends 0.4mm (Pro3 Series and Pro2 Series)
• A Hyper Speed Auto Calibrator (Pro3 Series Only)
• A spool of Hyper Speed PLA (Colour: White. Specifications: 1kg/ 1.75mm)
• A spool of Hyper Speed ABS (Colour: Natural. Specifications: 1kg/ 1.75mm)

Please note that for Hyper Speed to function correctly, the Hyper Speed Hot Ends 0.4mm, the Hyper Speed Auto Calibrator, and the Hyper Speed Filaments must be installed on a Pro3 or Pro 2 Series printer activated with Hyper Speed Mode. The absence of any of these components may result in printing failure.

Please note that one Hyper Speed Upgrade Kit can only be applied once to a single Pro2 or Pro3 Series 3D printer. If you wish to have the Hyper Speed Upgrade on multiple Raise 3D printers, please buy the corresponding number of Hyper Speed Upgrade Kits.

For Raise3D Pro3 Series and Pro 2 Series 3D printers.